Ax-lightness engage Operations Instructions download pdf (Page 44)

Mounting the pedals

Apply high-quality mounting grease to the threads in

the crank arms, the pedal threads

(a) as well as to the

contact surface of the pedal axles.

Position the axle of the right pedal with your ngers

and screw it in clockwise by a few turns

(b), before

tightening it with a pedal wrench

open-ended wrench.

The left pedal has a left-hand thread. Position the

axle also with your ngers and screw it in anticlock-

wise. Tighten the pedal subsequently with the pedal

wrench or a long, 15 mm open-ended wrench.

The recommended torque value is 34 Nm.

If you have AX-Lightness Morpheus cranks, check

whether the pedals are mounted absolutely free of

play in the crank arms.

If they are not, you must dismount the pedals and the

thread inserts completely. Slide the enclosed thin in-

termediate rings

(d) on the thread and re-mount the

pedals, as above described.

If the pedals still have play in the crank arm, even with

two intermediate rings, contact your AX-Lightness

and engage dealer, call our service centre on +49

(0)9270 / 91513-0 or send us a mail to

info@ax-lightness.de or

When dismounting the pedals, e.g. for

taking your bicycle with you on the plane,

remove the thread inserts from the cranks

and pack them separately into a bag.

Do not exceed the indicated torque value!

Check the torque value after the rst 100 to

300 km (60 to 180 miles) and every 2,000

km (1,200 miles) thereafter. Loose bolts or

pedal axles can result in an accident!

84 85

Handlebars - Stem

HANDLEBARS – STEM

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 64 65

No comments

Ax-lightness engage Operations Instructions Page 44