Ax-lightness engage Operations Instructions download pdf (Page 9)

Before installation watch out for sharp edges and

burrs in the seat tube of the frame

(a), at the seat post

clamp and the saddle clamping, in all clamping areas

of the fork, the headset, the stem, the handlebars and,

if necessary, on the handlebars approved for bar ends.

Do not use these components, if they have burrs or

sharp edges. Have components from any manufac-

turer with sharp edges or burrs checked by your AX-

Lightness and engage dealer. They will see, whether

this is a problem that can be solved or whether the

component has to be replaced.

Using a torque wrench

To achieve a reliable clamping of two components,

AX-Lightness and engage consider the use of a

torque wrench (b) absolutely necessary.

Exceeding the maximum torque value on clamp

bolts of the AX-Lightness and engage stem, head

tube or handlebars creates too much clamping force.

This can lead to a failure of the AX-Lightness and en-

gage component and not only bears the high risk of

an accident, but also voids the warranty.

Loose or overly tightened bolts can result in compo-

nent failure and in an accident. Strictly observe the

torque specications of AX-Lightness and engage

(c).

If you do not have a high-quality torque wrench, con-

tact your AX-Lightness and engage dealer.

Do not use components, if you are not ab-

solutely sure about their compatibility. If

you are in doubt contact your AX-Lightness

and engage dealer. If necessary, they will

get in touch with our AX-Lightness and

engage service centre.

Damaged AX-Lightness and

engage components must not be

re-used! If you are in doubt, we

recommend that you replace the

component. Do not use your bicy-

cle until this has been done.

For a secure clamping force, apply

AX-Lightness carbon assembly

paste to interconnecting surfaces

to increase friction.

Warranty terms

Under European consumer law, the purchaser

has full statutory warranty rights within the rst

two years from date of purchase. In North Amer-

ica, these rights apply to the rst year from the

date of purchase. According to these laws, your

AX-Lightness and engage dealer is responsible

for ensuring the product is free of defects that

could cause premature wear from normal use.

The European sales law guarantee is

only valid in states where European

legislation applies. Please ask your AX-

Lightness and engage dealer about

the regulations in your country.

Warranty claims will only be accepted, if the bi-

cycle has been used solely for its intended pur-

pose (see chapter “Before your rst ride – In-

tended use”).

It does not cover damage resulting from wear

(wear of saddle cover, lubricants, seals, wear of

bar tapes and grips, tyres, brake pads and brak-

ing surface of the rim in the case of rim brakes),

neglect (insucient care and maintenance),

accidents, overstress caused by overloading,

overstress due to an over-tightening, incorrect

installation, improper treatment or as a result

of modications made to the AX-Lightness and

engage component.

Be sure to strictly follow all installation instruc-

tions (especially torque values), maintenance

instructions as well as all additional instructions

provided by the manufacturers of products used

in conjunction with AX-Lightness and engage

products.

Observe the indicated behavioural and control

procedures as well as all instructions referring to

the replacement of safety-relevant components,

e.g. in the case of colour changes and cracks oc-

curring on the components etc.

Keep the user manuals of all safety-relevant com-

ponents for your records and future reference.

Your AX-Lightness and engage dealer is your di-

rect contact point for all issues in this user man-

ual. They will gladly answer comprehensively to

your questions.

In the event of a defect or if you have a warran-

ty issue, please contact your AX-Lightness and

engage dealer who sold you the AX-Lightness

and engage product in question.

AX-Lightness and engage have exclusive agree-

ments with all reseller partners to handle war-

ranty cases. If you purchase an AX-Lightness

and engage product from an unauthorized re-

seller, e.g. an auction site on the internet, you

are not entitled to recovery from AX-Lightness

or engage. In this case you must contact the re-

seller.

You must include your original proof of purchase

when initiating your claim.

14 15

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 64 65

Comments to this Manuals

No comments

Ax-lightness engage Operations Instructions Page 9

Comments to this Manuals